What is the purpose of TRiBot Client starter?


The purpose of TRiBot Client starter is to make botting easier, and is definitely recommended if you are botting over 2+ accounts. Once you have set up TRiBot client starter, it will only take one click "Run" to start unlimited number of accounts with the account, break profile, world, proxy, and script you have selected compared to loading up Tribot, entering your login information, loading up a Runescape client, clicking start script, selecting an account, selecting a script, starting the script and finally setting up This can reduce 30 minutes of setting up bots to 10 seconds. 

 

 

TRibot Client Starter:

  • Open tribot loader
  • Enter tribot username and password
  • Open tribot client starter
  • Click Run
  • Enter Tribot password
  • Sit back and watch the client starter open all the clients for you, load the world, select the script, account, and click start for you and maybe even fill out the GUI.
  • DONE.

You:

  • Open up tribot loader
  • Enter tribot username and password
  • Load up a RS client
  • Click start script
  • Search through all the accounts for the account you want to load...
  • Search through all the scripts for the script you want to load..
  • Search through all the break profiles that you want to use..
  • Click Run script
  • Repeat all the steps above for X accounts until DONE.. (OMG KILL ME)

 

 

 

 

 

Requirements for using the client starter:

-VIP Extended (I believe unless trilez changed it)

 

 

Setting up TRIBot Client Starter:

 

You can find TRiBot client starter after loading up a tribot client. It is on the top of TRiBot client (View->Client starter).

e91bda6dd10adf3a0b7258d6bf8765e9.png

 

You will be then prompted with a client starter window. Here is all the information you need to know:

 

 

Client list:

6c93fa973f09f2534164576ecd1aa1f2.png

This list shows the information each TRiBot client will be loaded with, and how many clients will be loaded. Click each client to see what exactly is going to be loaded on the client such as the proxy information, the accounts, etc.

 

 

 

 

File tab:

c2f21c29829304680bda21fd96b27153.png

  • New profile - Creates a new profile which you can name whatever you want (This clears your current client selected on the list)
  • Save profile - Saves the current setup you have into a encrypted .dat file that you can later to start up your scripts with one click.
  • Load profile - Loads a profile you created such as "RUNECRAFTERS Accounts 1-10"

 

 

 

Profile tab:

fb8c3b60a0b332310ed4eff02f2dffaf.png

  • New client - This adds a new "TRiBot client" that the client starter will start up and setup for you automatically. (I prefer to use one account per client, even though the client starter supports client tabs.)
  • Remove client - This removes the current selected client in your list.
  • Run - Once you click this, you will be prompted for your tribot password to authorize your proxies if you're using them. After entering your password, the client starter will begin doing its magic and load up all the clients you had with the specificed information.

 

 

 

Proxies information, Heap size & Client type

I think these are pretty self explanatory, but I'll explain them anyways.

710251b965098f9fe868a3d9decee6f6.png

 

This is your proxy the client you selected on the left hand side (client1, client2, etc) will load with. If you're not using proxies, skip the fields requiring proxy information. They are not necessary to fill out.

 

  • Proxy IP : Self explanatory, you fill in your proxy IP here. Make sure they are socks proxy or they won't connect.
  • Proxy Port: Self explanatory, you fill in your proxy port here. Make sure they are the SOCKS port and not HTTP.
  • Proxy Username: Some proxies have this, and some does not. If your provider has one, make sure you fill it out properly. If it is filled out incorrectly, the proxy will NOT connect.
  • Proxy Password: Some proxies have this, and some does not. If your provider has one, make sure you fill it out properly. If it is filled out incorrectly, the proxy will NOT connect.
  • Heap size: I prefer to use 256 MB per tab. So Accounts*256 would be your heap size. Some may suggest 256 for first client, then 170-200 for the rest.
  • Old school - Check this if you want the client starter to load up runescape old school, if not checked it will load up TRiBot RS3.

 

 

 

The main information:

 

ebdb64fd68d90baa803c65769c4ac909.png

NOTE: Just because there is only one blank, does mean the client starter does not support client tabs. You just have to fill out the first blank for the second one to show.

 

  • Account Name: This is the email you have in your Account Manager. DO NOT USE YOUR RUNESCAPE ACCOUNT NAME. Type it exactly, and if there is a typo, the script will not start.
  • Script Name: This is the script name you have in your Script manager. DO NOT USE ANY ABBREVATIONS OR ANY SORT. Type it exactly, and if there is a typo, the script will not start.
  • World: This is the selected world that your client will start in, if there is no world selected, it will use a random world. It is not necessary to fill out.
  • Break Profile - This is the "breaking profile" that your client will use. If there is no break profile selected, it will not break. MAKE SURE YOU TYPE YOUR BREAK PROFILE EXACTLY.
  • Script command - The scripter has to implement this into his script before it works. This is to skip the GUI so all you have to do is one click run without having to use a GUI.